One of the many things I’m looking forward to during my apprenticeship is meeting the various local coppicing communities. Coppicers tend to work alone as sole traders and this means that networks are an important way for local coppicers to meet and share skills and stories.
This weekend I had the honour of being invited along to one of the East Anglian Coppice Network events being held at a woodland owned by Iain Loasby. I met Iain after discovering his shop just up the road from me in London. When I came across his shop a year ago I was intrigued by this strange shop that seems to being selling a variety of sticks. When I won the national coppicing apprenticeship I was delighted to remember this shop and realised what a treasure was on my door stop. Although the name would suggest otherwise, Wood Green was the last place I’d expect to find a coppicers shop.
So a few weeks ago I eagerly presented myself to Iain as a fledgling coppicer and was invited along to the network event.
On the agenda this time around was Besoms Brooms and Traditional Rakes. Both of these, especially brooms, are a staple for coppicers and although not used as much for their originally purpose still attract customers looking for a nice item on their wall.
First up was Paul, a newly retired coppicer, who showed us how to make an ash rake. Rakes often come with regional differences and can use a split handle or a flexible piece of hazel to brace the head. I believe in this case we were being taught the Suffolk way of putting a rake together.
Before anything else you need a nice piece of ash around 6 – 10cm in
diameter to make heads. We were lucky enough to have a lovely piece of ash that split beautifully and I was assured it wasn’t always this easy.
Once you have a rough size its time to use a shave horse to take the bark off and turn it into a lovely smooth piece of wood. Paul chose to ‘batter’ his heads which is a bricklaying term that means making the top of the head thinner than the bottom, but Andy, another coppicer at the event didn’t think this was necessary.
Making the pegs was an interesting process. First a piece of tree truck the same length as you want your pegs was split into tiny pieces, using an old inner tube to hold the wood together, then these pieces were jammed through a piece of metalwork called a tine cutter. Apparently its useful to have a splayed end on your tine cutter so that the tines don’t get stuck as they push through the hole.
One of the great things about the day was getting these sorts of little hints and tips from the experienced coppicers. “Throw the mallet instead of hit it” was advice from Andy which stopped my wrist hurting so much, and “aim for down here” was more great advice from Paul as he pointed to half way down the piece of wood I was preparing to split with a Froe (a type of wood splitting tool).
After the tines/pegs were made the next task was to drill holes into the head. Paul suggested using a ‘green’ head (a piece of wood that hasn’t been seasoned) with seasoned pegs. This would mean that the head would season and shrink around the pegs, holding them into place.
The pegs were then shaved down on two sides and bashed in with a mallet. Next we needed to choose a handle and split the end. A rake handle can be quite long and needs to be straight as possible but can have some wiggles* in it for character. After the handle and head are fixed together copper nails were used to keep the head and handle together.
Another handy tip to remember was to drill a hole at the end of the split and wrap some wire around to keep the split from going any further.
Besom Brooms
In the afternoon it was Andy Bashem‘s turn to show us how to make a good broom. I’ve already helped my mentor Mark to collect birch ‘sprays’ (birch sticks) so it was interesting to see the next step in the process.
Andy chooses to make all natural brooms without any metal parts as this seems to appeal
more to witches. No, this isn’t a joke. Apparently wiccans use besom brooms to clear old spells from ritual spaces but the brooms mustn’t contain any metal. This is the kind of vital information passed on during networking events. There is also an aesthetic reason for a wireless broom but it does take much more time to make.
One starts off by grabbing a handful of birch sprays then moving them around until all the bottoms of the twigs are lined up. You need a bit space to wrap around your binding material so any twigs that are in the way are pruned. When your happy with your bundle of birch sprays you can then start the wrapping process. In this case we used some Elm Bark that Andy had had in his barn for a couple of years. To refresh it he simply soaked it in water for a couple of hours the night before and the bark became flexible again like leather.
Once the binding was on tight we then drove a sharpened stake through the middle of the bundle and used a wooden peg to hold the handle in place. The peg is important to stop the twigs and the handle from separating and the customer being left with a very sharp stick in their hands. A good handle can also increase the price of a broom if it has special features like twists. Andy didn’t try to make the broom look all the same and believed that as people are all unique then the difference in the brooms would appeal to different people. As I didn’t pick up enough birch I was pleased to hear this and declared my very small broom a special camper van sized broom to fit into tiny houses just like my own. The broom was then bound with baling twine so that when the twine was removed in a few days the broom would maintain a slimmer shape.
Overall I had a lovely day with the East Anglian Coppice network. I raked in the knowledge and wasn’t swept away by all the new information at all.
I hope to visit some of the members coppices over the next few years and plan to join them at another event soon!
*I’ll develop my technical terminology as go – but in the mean time i’ll be making up my own…)
